Jumper setting for Williams sound board.
========================================
W1=no speech board attached. Remove if using Sinistar aux speech board. 

Use W2 and W9 for 2516 or 2716 Eprom(Stargate)
Use W3 and W4 for 2532 Eprom(Robotron,Bubbles,Sinistar)

W5 used always unless Big Strike Bd(then use W6)

W7 used always.

W10 used always unless Big Strike Bd(then use W11)

W12 not used unless Big Strike Bd.

W15 used always.

If you have a Stargate, jumpers shoud be W1,W2,W5,W7,W9,W10,W15
If you have Robotron, Bubbles, jumpers should be W1,W3,W4,W5,W7,W10,W15
Sinistar is the same as Robotron execpt remove W1(unless on cockpit
rear board)

Williams Sound Board
Looking at it with the main connectors at the top
#####################################################################
# Dip sw+=>%%   ooooooooo       oooo       oooo       ooooooooo     #
#          %%          --W1--                     !     !           #
#  #####<=Reset sw                              !===! !===!  =   =  #
#                          !             %%heat !   ! !   !  #   #  #
#                     W15=>!         IC1 %%sink !C14! !C15!  #   #  #
#                          !             %%     !   ! !   !  #   #  #
#                                               !===! !===!  =   =  #
#                                                 !     !   F1  F2  #
#     IC2   IC3   IC4    IC5   IC6                                  #
#     ###   ###   ###    ###   ###  -W2--      IC7                  #
#     ###   ###   ###    ###   ###  -W3--      ###                  #
#     ###   ###   ###    ###   ###  -W4--      ###                  #
#     ###   ###   ###    ###   ###  -W5--      ###                  #
#                -c18-              -W6--      ###       heat       #
#    -c16- -c17- --W9-  -c19- -c20-                      sink       #
#    --W7- -r18- -W10-        -W12-  -r21-              -#####      #
# @@ --W8- -r19- -W11-        -W13                      -#IC8#      #
# @@                                                    -#####      #
# @@ #######     #######      #######       #######      heat       #
# @@ #     #     #     #      #     #       #     #      sink       #
# @@ #IC9  #     #IC10 #      #IC11 #       #EPROM#                 #
# @@ #6802 #     #     #      #     #       #     #                 #
# @@ #     #     #     #      #     #       #     #                 #
  ^
  ^
  ^
  fifty pin connector to speech board.(may or may not be stuffed)


The rest is removed for clarity.